Some households don’t have room for a full dryer stand and washing machine setup side by side at all, needing to combine two full-sized appliances into one column instead. A stackable dryer stand in Australia solves this by supporting both a washing machine and dryer in a genuinely stacked configuration.
Rather than fitting around a washing machine you already own, a stacked setup houses both appliances together on a single dedicated unit. This suits households running a full-sized washer and dryer combination that needs to sit within one compact footprint.
The room must still provide adequate width, depth, and overhead clearance. A stacked arrangement saves floor space but increases total height. Controls, doors, filters, hoses, and ventilation points should remain accessible.
The installation route also matters because the complete frame is larger than a standard stand. Measure doorways, corners, stairs, and other restricted access points. Assembly may need to occur inside the laundry.
Britec offers different freestanding configurations because a top loader, a standard front loader and a confined laundry do not require the same solution.
Top & front loaders
An adjustable option for households that need clearance above a top loader or flexibility around a front loader.
Two-dryer solution
A vertical two-tier configuration created for households that need to organise more than one dryer above a front loader.
Front loaders
A front-loader solution designed to move into position more easily in laundries where access around the washing machine is limited.
Britec offers a specific product built for this exact configuration, distinct from its standard dryer stands designed to sit above an existing washing machine.
This model is built for front loader washing machines and dryers together, combining both appliances into a single stacked unit. It’s priced at $420, reflecting the larger, combined frame required to support two full appliances at once.
Confirm current pricing and availability before ordering because these details can change. More importantly, verify the appliance dimensions and the unit’s published capacity. Never assume every front loader pair will fit.
A standard Britec dryer stand, like the Maxi White or Adjustable models, is designed to sit above a washing machine you already have installed. The Twin Stack Combo works differently, providing the stacking structure for both appliances as a single purchase.
If you’re specifically after a combined solution rather than adding a stand to an existing washing machine, this is the model worth looking at first.
Existing appliances still need compatible doors, controls, feet positions, and connections. Check whether hoses and power cables can reach safely. Leave adequate room for servicing and future appliance removal.
If only the dryer needs elevation, a standard Britec stand may be more appropriate. The Twin Stack Combo serves households wanting an integrated structure for both appliances. Choose according to the intended configuration.
Because this model supports both appliances together, a few specific checks matter more than they would with a standard stand.
Worth confirming before ordering:
Until those specifications are confirmed, avoid making universal compatibility claims. Record both appliance models and contact Britec for guidance. Written confirmation can help prevent an unsuitable purchase.
Also check the combined operating height against every regular user’s reach. Controls and detergent access should remain practical. The dryer manufacturer’s ventilation requirements still apply in a stacked arrangement.
Even for this combined product, Britec applies the same core standards used across its dryer stand range. That includes SGS testing on the relevant models and a five-year warranty covering defects in material and workmanship.
A few other points worth knowing:
Freestanding construction avoids permanent wall changes but still requires stable flooring. Prepare a clean, firm surface before assembly. Do not place the unit over loose mats or damaged tiles.
The warranty excludes ordinary wear, accidents, negligence, modifications, and unintended use. Natural disaster damage also remains outside coverage. Keep proof of purchase after installation.
Afterpay and Zip Money are both available at checkout, letting you spread the cost with no interest added. Shipping covers most of Australia through Australia Post or a selected courier, though deliveries can’t be sent to PO boxes.
If you’d rather confirm the fit in person, showroom pickup is available in Pemulwuy, New South Wales, and Ripley, Queensland, depending on current stock. Installation is also offered in Sydney and Brisbane, generally costing between $120 and $200 depending on location.
Before delivery, clear the laundry access path and decide where assembly will occur. Confirm that the final position preserves ventilation, power access, drainage access, and comfortable operation of both appliance doors.
A genuinely stacked dryer stand solves the space problem differently to a standard stand, housing both appliances together from the start. If your Australian laundry needs a combined footprint rather than a stand added to an existing washing machine, this option is worth exploring. Reach us today to confirm compatibility with your specific washing machine and dryer.
The value of a dryer stand is not simply that it holds an appliance. The design needs to work with the room, the washing machine and the way the household uses the laundry.
Freestanding
No wall brackets or drilling are required for the stand itself.
Adjustable setup
Selected models provide width, height or levelling adjustment.
Anti-slip shelf
Rubber shelf material is designed to reduce dryer movement and vibration.
Portable solution
A practical choice for renters and households planning future moves.
A simple process helps avoid fit issues and makes product selection much easier.
Record the available width, depth and height, including cabinets, doors and services.
Check machine dimensions, dryer weight and top-loader lid clearance where relevant.
Compare your measurements with Britec sizing guides and certified capacity.
Follow the model instructions or arrange professional installation in an available area.
Tony Kahale created the Dryer Stand after identifying a need for a more practical space-saving laundry solution.
The response to the original design led to Britec Innovative Products and an expanding range of home solutions. The company continues to develop products around common household problems, with customer conversations helping shape future designs.
Britec remains Australian owned and operated, with an in-house focus on product quality and personalised customer service.
Tony Kahale Founder & Product Design Developer
