Britec dryer stands support a dryer above the washing machine through a steel frame, providing a practical dryer shelf solution in Australia without wall mounting. The legs transfer the load directly to the floor. This design keeps the wall untouched while opening usable space around the appliances.
A stand still requires thoughtful installation. The floor must be firm, with correctly adjusted feet. Dryer weight must remain below the model’s safe capacity. Measurements should include handles, doors, lids, hoses, and controls.
No Drilling Required
No wall brackets are needed because the stand carries its own load. This feature suits rental properties and homes with unsuitable walls. It also avoids permanent holes when owners expect to change the room later.
Freestanding does not mean casual placement. The assembled stand should remain square, stable, and correctly levelled. Follow the supplied instructions and tighten every required connection. Never use improvised blocks beneath the legs to gain extra height.
Adjustable Feet for Uneven Floors
Laundry floors may slope slightly towards a drain. Adjustable feet help compensate for minor variations and reduce rocking. Make small adjustments until the frame sits evenly on all contact points.
The feet cannot correct damaged or seriously uneven flooring. Inspect the surface before installation and remove loose mats underneath. Recheck the stand after initial use, particularly if appliances create noticeable vibration.
Britec offers several laundry space saving solutions Australia wide. Choosing between them depends on washing machine style, dryer size, available clearance, and desired finish. Our guide explains which Britec dryer stand will work best for you based on these considerations.
The principal options include:
- Dryer Stand Adjustable Black for top and front loaders, rated to 80 kilograms
- DSU5 Ultra with extra-low height adjustment, rated to 80 kilograms
- Dryer Stand Maxi White and Maxi Black Edition models, rated to 100 kilograms
- Maxi Adjustable for wider front loading washing machines and dryers
- Glide-in Maxi for easier positioning within confined front loader laundries
- Washer Base for raising front loaders, rated to 150 kilograms
The Maxi series supports front loading setups and models are available with capacities up to 100 kilograms. See our guide to a 100kg rated dryer stand in Australia for more information. Adjustable and Ultra models accommodate both washer types. Top loader owners must confirm full lid clearance.
Dryer compatibility includes heat pump, condenser, vented, and gas models. However, compatibility only applies within the stand’s stated weight rating. Dimensions, ventilation requirements, and connection access must also suit the installation.
Photographs cannot confirm structural performance. Steel thickness, joints, shelf grip, and testing affect stability. Britec stands carry SGS-certified load ratings.
Useful comparison points include:
- A clearly identified maximum load for every model
- An anti-slip shelf supporting the dryer during operation
- Adjustable feet for accurate positioning on suitable floors
- Freestanding construction that avoids permanent wall drilling
Buyers should compare the dryer’s actual weight with the rating. Leaving capacity above that figure provides confidence that the chosen product is appropriate. Never include items stored on the dryer when judging normal use.
Britec’s five-year warranty covers defects in materials and workmanship. Covered faulty parts may be replaced at no cost during the warranty period. The purchase invoice or warranty card confirms when coverage begins.
The warranty excludes several situations:
- Expected wear resulting from ordinary household use
- Accidental damage or damage caused through negligence
- Use outside the product’s stated purpose
- Changes or modifications made to the stand
- Damage from flooding, fire, or natural disasters
Correct assembly and intended use remain the owner’s responsibility. Retaining purchase records and following instructions can simplify a genuine warranty request. The exclusions also prevent normal damage from being confused with a manufacturing defect.
Measure the complete installation area before ordering. Include skirting boards, taps, power points, hoses, overhead cupboards, and door swing. Confirm the model’s width and height range against those measurements.
Afterpay and Zip Money are available for eligible checkout purchases. Britec ships across most Australian locations through Australia Post or selected couriers. Orders cannot be delivered to PO boxes.
Pickup is available from Pemulwuy in New South Wales and Ripley in Queensland. Availability depends on current stock. Buyers who want assistance should confirm applicable local installation services before ordering.
Useful laundry space saving solutions in Australia should improve access without compromising appliance support. A correctly chosen freestanding stand can open the floor and preserve layout flexibility. Measure carefully, confirm the dryer weight, and select a model designed for your washer type. Contact us for help matching a Britec stand with your appliances and available space.
