Some households need more than a standard dryer stand can offer, particularly with larger or heavier appliances. A heavy duty dryer stand in Australia needs a genuinely strong frame and a load rating that leaves real margin, not one that sits right at the limit. Britec Innovative Products builds its Maxi range and Washer Base specifically for this level of demand.
The term gets used loosely across a lot of budget products, so it’s worth being specific about what it involves. For Britec, it starts with the steel used in the frame and extends through to how the stand performs under real vibration during a full cycle.
Heavy duty should describe measurable capacity rather than appearance. The frame, shelf, fasteners, and feet work together to support the load. Correct assembly remains necessary even when the stand carries a higher rating.
Room fit also affects performance. A strong stand can still be unsuitable when it touches the washer or blocks ventilation. Measure both appliances and the available installation area before ordering.
Britec offers different freestanding configurations because a top loader, a standard front loader and a confined laundry do not require the same solution.
Top & front loaders
An adjustable option for households that need clearance above a top loader or flexibility around a front loader.
Two-dryer solution
A vertical two-tier configuration created for households that need to organise more than one dryer above a front loader.
Front loaders
A front-loader solution designed to move into position more easily in laundries where access around the washing machine is limited.
A few specific models in the range are designed to carry more weight than the standard options.
Dryer Stand Maxi White, Black Edition, and Maxi Adjustable are all rated to hold up to 100 kilograms, covering larger heat pump and condenser dryers that sit heavier than average.
The fixed Maxi models suit standard front loading washing machines. Maxi Adjustable adds width flexibility for larger units. Each uses an anti-slip shelf and adjustable feet.
For the heaviest combined setups, the Washer Base carries a 150 kilogram rating, suited to front loading washing machines and dryers together on a single elevated frame.
The Washer Base raises one compatible front loading appliance rather than surrounding an existing washer. It offers two height options and basket clearance underneath. Four tile suction cups provide added stability on suitable surfaces.
A heavy duty rating is only as good as the frame backing it up. Every model in this category uses high quality steel construction, built to resist flexing under real household weight rather than just looking sturdy in a product photo.
An anti-slip rubber shelf sits on top, reducing the vibration and movement that heavier dryers tend to produce during a full drying cycle. Adjustable feet correct for uneven laundry floors, keeping the whole frame stable underneath that load.
The anti-slip surface does not increase the published rating. Every dryer foot must sit within the intended shelf area. Avoid adding loose storage or unnecessary weight above the appliance.
The floor must remain firm and structurally sound. Adjustable feet correct minor variations rather than damaged tiles. Recheck the frame if unusual movement appears during operation.
A weight rating only means something if it’s genuinely been tested rather than estimated. Britec has its relevant models independently tested by SGS, a recognised testing and certification organisation, checking structural performance under real load conditions.
A few other points worth knowing:
Testing verifies the stated capacity for the relevant model and configuration. It does not cover modifications or substituted components. Follow the exact assembly instructions supplied with the purchased product.
It’s worth checking your dryer’s exact weight before assuming you need the heaviest rated option available. Plenty of standard dryers sit comfortably under 80 kilograms and suit the regular Adjustable or Ultra models just fine.
Where a heavy duty stand genuinely earns its place is with larger family-sized dryers, or households wanting extra margin above their dryer’s actual weight for long-term peace of mind.
Check weight through the appliance manual or official specifications. Do not estimate it from drum size. Measure width, depth, feet positions, and ventilation clearance at the same time.
Choosing the highest rating automatically may create an unnecessary fit problem. Match the stand to the washer type and available room. Capacity, dimensions, and intended use must all align.
The same five-year warranty applies across the heavy duty range, covering defects in material or workmanship with faulty parts replaced at no cost during that period. It doesn’t extend to normal wear and tear, accidental or negligent damage, modifications made after purchase, or use outside the product’s intended purpose.
Afterpay and Zip Money are both available at checkout, letting you spread the cost with no interest added. Shipping covers most of Australia through Australia Post or a selected courier, though PO boxes aren’t accepted as a delivery address.
If you’d rather see the frame in person before buying, showroom pickup is available in Pemulwuy, New South Wales, and Ripley, Queensland, subject to stock. Installation is also offered in Sydney and Brisbane, generally costing between $120 and $200 depending on location.
Any properly rated heavy duty dryer stand should give genuine confidence with larger or heavier appliances, not just a higher number on the spec sheet. With independently tested frames rated up to 150 kilograms, Britec’s range covers even the most demanding household setups in Australia. Reach us today to confirm which model suits your dryer and washing machine.
The value of a dryer stand is not simply that it holds an appliance. The design needs to work with the room, the washing machine and the way the household uses the laundry.
Freestanding
No wall brackets or drilling are required for the stand itself.
Adjustable setup
Selected models provide width, height or levelling adjustment.
Anti-slip shelf
Rubber shelf material is designed to reduce dryer movement and vibration.
Portable solution
A practical choice for renters and households planning future moves.
A simple process helps avoid fit issues and makes product selection much easier.
Record the available width, depth and height, including cabinets, doors and services.
Check machine dimensions, dryer weight and top-loader lid clearance where relevant.
Compare your measurements with Britec sizing guides and certified capacity.
Follow the model instructions or arrange professional installation in an available area.
Tony Kahale created the Dryer Stand after identifying a need for a more practical space-saving laundry solution.
The response to the original design led to Britec Innovative Products and an expanding range of home solutions. The company continues to develop products around common household problems, with customer conversations helping shape future designs.
Britec remains Australian owned and operated, with an in-house focus on product quality and personalised customer service.
Tony Kahale Founder & Product Design Developer
