Uneven laundry floors are more common than most people expect, and a dryer stand with adjustable legs accounts for that directly. Britec Innovative Products fits every model in its range with adjustable feet, allowing the frame to level out even when the floor underneath isn’t perfectly flat.
A dryer stand that sits slightly uneven can rock or shift during a full drying cycle, which puts extra strain on the frame over time. Adjustable legs solve this at the source, letting you correct for any dip or unevenness in the laundry floor before the dryer is even loaded on top.
Older Australian homes in particular tend to have laundry floors that aren’t perfectly level, which makes this feature more practical than it might first seem.
Many laundry floors also slope slightly towards a drain. Individual foot adjustment can help establish even frame contact. However, damaged tiles or serious slopes require correction before installation.
Levelling protects more than appearance. It helps maintain predictable clearance around the washing machine. A leaning frame may sit closer to the appliance on one side.
Britec offers different freestanding configurations because a top loader, a standard front loader and a confined laundry do not require the same solution.
Top & front loaders
An adjustable option for households that need clearance above a top loader or flexibility around a front loader.
Two-dryer solution
A vertical two-tier configuration created for households that need to organise more than one dryer above a front loader.
Front loaders
A front-loader solution designed to move into position more easily in laundries where access around the washing machine is limited.
Each leg on a Britec stand can be adjusted individually, allowing you to level the whole frame out during setup rather than relying on the floor being perfectly flat to begin with.
Begin with the frame unloaded and positioned in its intended location. Adjust each foot gradually until every contact point carries weight. The stand should not rock when checked carefully.
Do not place loose blocks, timber, or other improvised materials beneath the feet. These can shift during appliance operation. Use the adjustment system supplied with the stand.
The adjustable feet are typically set once during assembly, checked against a level surface, and then left in place for ongoing use. This is a straightforward part of the setup process, covered in the assembly instructions provided with every stand.
Recheck the frame before lifting the dryer onto the shelf. Confirm that fasteners are secure and the stand remains square. Suitable lifting assistance should be arranged for the appliance.
Adjustable legs also help if you ever reposition the stand within your laundry, letting you re-level it in a new spot without needing any additional tools or hardware.
Floor conditions may vary even within the same room. Never assume the previous setting suits a new position. Recheck every foot whenever the stand is moved.
Adjustable feet aren’t limited to a single stand in the range, which is worth knowing if you’re comparing models on other grounds.
The feature is included across:
Load ratings differ because these products serve different appliance arrangements. The Adjustable and Ultra models suit top and front loaders. Maxi models are intended mainly for front loading setups.
The Glide-in Maxi combines adjustable feet with fixed directional caster wheels. The wheels help positioning, while the feet support the final setup. Follow its specific assembly and adjustment instructions.
The legs work as part of a broader design, rather than as a standalone feature.
A few things that pair with the adjustable legs:
The anti-slip shelf helps maintain contact beneath the dryer’s feet. It does not correct overloading or poor assembly. Stay within the selected model’s published safe load.
Heavy-gauge steel supplies the main structural support. The floor must remain firm and suitable. Remove unstable mats and address damaged surfaces before installation.
Britec has its relevant models SGS tested for safety, verifying how the frame performs under load, adjustable legs included. Every stand also comes with a five-year warranty covering defects in material and workmanship, though this doesn’t extend to damage from misuse or modifications made after purchase.
The business has operated in Australia since 2009, and its range is stocked by major retailers, including Harvey Norman, Bunnings, and Amazon. Customer reviews currently sit at an Excellent rating across 104 reviews.
The five-year warranty excludes ordinary wear, accidental damage, negligence, modifications, and unintended use. Natural disaster damage also remains outside coverage. Keep the invoice or warranty card.
Afterpay and Zip Money are both available at checkout, letting you spread the cost with no interest added. Shipping covers most of Australia through Australia Post or a selected courier, though deliveries can’t be sent to PO boxes.
If you’d rather check the adjustable legs in person, showroom pickup is available in Pemulwuy, New South Wales, and Ripley, Queensland, depending on stock. Installation is also offered in Sydney and Brisbane, generally costing between $120 and $200 depending on your location.
Before ordering, confirm the washing machine type, dryer weight, and room dimensions. Adjustable feet improve levelling, but they cannot make an incompatible model fit. Product selection comes before final adjustment.
A dryer stand with adjustable legs takes the guesswork out of dealing with an uneven laundry floor. With this feature built into every model in the range, stability isn’t something you need to compromise on. Reach us today to confirm which stand suits your washing machine and laundry layout.
The value of a dryer stand is not simply that it holds an appliance. The design needs to work with the room, the washing machine and the way the household uses the laundry.
Freestanding
No wall brackets or drilling are required for the stand itself.
Adjustable setup
Selected models provide width, height or levelling adjustment.
Anti-slip shelf
Rubber shelf material is designed to reduce dryer movement and vibration.
Portable solution
A practical choice for renters and households planning future moves.
A simple process helps avoid fit issues and makes product selection much easier.
Record the available width, depth and height, including cabinets, doors and services.
Check machine dimensions, dryer weight and top-loader lid clearance where relevant.
Compare your measurements with Britec sizing guides and certified capacity.
Follow the model instructions or arrange professional installation in an available area.
Tony Kahale created the Dryer Stand after identifying a need for a more practical space-saving laundry solution.
The response to the original design led to Britec Innovative Products and an expanding range of home solutions. The company continues to develop products around common household problems, with customer conversations helping shape future designs.
Britec remains Australian owned and operated, with an in-house focus on product quality and personalised customer service.
Tony Kahale Founder & Product Design Developer
