Small laundries need a stand that solves the space problem rather than adding to it. A dryer stand for a small laundry has to be compact, freestanding, and stable enough to handle daily use without eating into an already tight room. Britec Innovative Products has built several models with exactly this scenario in mind.
In a tight laundry, every centimetre of floor space matters. Placing a washing machine and dryer side by side often isn’t realistic, and bulky storage units make the problem worse rather than better.
Stacking the dryer above the washing machine solves this directly, freeing up floor space without needing a renovation or extra square metres.
The washing machine remains on the floor and carries its own weight. The stand supports the dryer independently through its frame. This avoids placing one appliance directly onto the other.
Small rooms also make appliance access more important. Washer doors, lids, detergent drawers, filters, taps, and power points must remain reachable. A setup that technically fits can still be difficult to use.
Britec offers different freestanding configurations because a top loader, a standard front loader and a confined laundry do not require the same solution.
Top & front loaders
An adjustable option for households that need clearance above a top loader or flexibility around a front loader.
Two-dryer solution
A vertical two-tier configuration created for households that need to organise more than one dryer above a front loader.
Front loaders
A front-loader solution designed to move into position more easily in laundries where access around the washing machine is limited.
A few specific models in the range work particularly well when space is genuinely limited.
This model uses mini fixed caster wheels, letting you push the dryer into place rather than lift it. That’s especially useful in a small laundry where there’s barely room to manoeuvre a heavy appliance by hand.
The caster wheels move in a fixed direction for controlled positioning. Once the stand is set, it remains stable. The Glide-in Maxi suits front loading arrangements and carries up to 100 kilograms.
The Ultra offers an extra low height option compared to the standard Adjustable model, which helps in laundries with limited vertical clearance as well as limited floor space.
It suits top and front loading washing machines and carries dryers up to 80 kilograms. Two shelf height options provide additional flexibility. Top loader owners must still confirm full lid clearance.
A few specific features matter more in a small laundry than they might elsewhere.
Worth checking before you choose a model:
Check the dryer’s weight through official appliance specifications. Do not estimate it from capacity alone. Also measure its width, depth, feet positions, and required ventilation space.
Consider the full installation route, including doors, stairs, and narrow corners. A stand that fits the laundry may still be difficult to carry inside after assembly.
Because every Britec stand is freestanding, nothing needs to be fixed to the wall to make it work. In a small laundry, this also means you can reposition the stand slightly if you ever rearrange the room, without worrying about existing wall fixings.
Adjustable feet correct for uneven flooring, which is common in older, smaller laundries that weren’t necessarily built to a standard layout.
They can correct minor variations but cannot repair damaged flooring. Remove loose mats and inspect the surface before installation. Level the frame completely before lifting the dryer onto its shelf.
Freestanding equipment can also move with the household, provided the next setup remains compatible. Recheck every measurement whenever appliances or rooms change.
A smaller footprint doesn’t mean a compromise on strength. Britec has its stands SGS tested on the relevant models, and every purchase comes with a five-year warranty covering defects in material and workmanship.
A few other points worth knowing:
The anti-slip shelf supports grip beneath the dryer’s feet. It does not increase the published load rating. Correct assembly and stable floor contact remain essential.
The five-year warranty excludes normal wear, accidents, negligence, modifications, and unintended use. Natural disaster damage also sits outside coverage. Keep the invoice or warranty card after purchase.
In a small laundry specifically, it’s worth measuring your available space carefully before choosing a model. Check the width available around your washing machine, the height clearance above it, and whether your dryer’s weight sits comfortably within the stand’s rated load.
Getting these measurements right avoids ordering a stand that technically fits on paper but feels cramped once it’s actually installed.
Measure the washing machine’s full cabinet rather than its body alone. Include protruding doors, controls, hoses, and rear connections. Then check total room height with the dryer positioned above.
Leave the clearance required for ventilation and future servicing. Nearby cupboards and doors should open normally. Allow enough working space to clean around both appliances.
Afterpay and Zip Money are both available at checkout, so the cost can be spread out with no interest added. Shipping covers most of Australia through Australia Post or a selected courier, though deliveries can’t be sent to PO boxes.
If you’d rather check the fit in person, showroom pickup is available in Pemulwuy, New South Wales, and Ripley, Queensland, subject to stock. Installation is also offered in Sydney and Brisbane, generally costing between $120 and $200 depending on location.
A small laundry doesn’t need to feel cramped just because the room itself is limited. With the right stand, you free up genuine floor space while keeping both appliances stable and protected. Reach us today to talk through your laundry’s measurements and find the right fit.
The value of a dryer stand is not simply that it holds an appliance. The design needs to work with the room, the washing machine and the way the household uses the laundry.
Freestanding
No wall brackets or drilling are required for the stand itself.
Adjustable setup
Selected models provide width, height or levelling adjustment.
Anti-slip shelf
Rubber shelf material is designed to reduce dryer movement and vibration.
Portable solution
A practical choice for renters and households planning future moves.
A simple process helps avoid fit issues and makes product selection much easier.
Record the available width, depth and height, including cabinets, doors and services.
Check machine dimensions, dryer weight and top-loader lid clearance where relevant.
Compare your measurements with Britec sizing guides and certified capacity.
Follow the model instructions or arrange professional installation in an available area.
Tony Kahale created the Dryer Stand after identifying a need for a more practical space-saving laundry solution.
The response to the original design led to Britec Innovative Products and an expanding range of home solutions. The company continues to develop products around common household problems, with customer conversations helping shape future designs.
Britec remains Australian owned and operated, with an in-house focus on product quality and personalised customer service.
Tony Kahale Founder & Product Design Developer
