A freestanding dryer stand places its legs around the washing machine. The washer remains on the floor and carries its own weight. However, its width and depth affect how the frame can be positioned.
Heavy front loaders often contain substantial internal counterweights. Their cabinets may also be wider than compact machines. Limited gaps around them can make hoses, doors, and service access difficult.
Measure the complete washing machine rather than the cabinet alone. Include its door, controls, feet, hoses, and any rear protrusions. Record surrounding obstacles such as taps, skirting boards, cupboards, and doorways.
Floor condition matters as well. The stand’s feet need firm, even contact outside the washer’s footprint. A damaged tile or severe slope may prevent accurate levelling.
Fitting Around Bulkier Front Loaders
Fixed-width stands suit many standard front loaders, but wider appliances need another approach. Britec’s Maxi Adjustable allows width adjustment for larger washing machines and dryers. Its maximum safe dryer load remains 100 kilograms.
Compare the appliance measurements with the stand’s published adjustment range. Leave enough clearance to prevent vibration contact during spinning. The washer must not press against the frame legs.
Consider future servicing before choosing the tightest possible fit. Technicians may need access to hoses, filters, power points, or rear connections. Practical clearance can prevent difficult appliance removal later.
Keeping the Dryer Stable Above It
The washing machine’s weight does not determine the dryer’s shelf rating. The stand supports only the dryer above. Check the dryer’s exact weight through the manufacturer or appliance manual. Keep written specifications available while comparing models and measuring the room.
Britec’s Maxi models carry dryers weighing up to 100 kilograms. An anti-slip shelf helps reduce movement during operation. Adjustable feet help level the frame across suitable floor surfaces.
The dryer must fit fully on the intended shelf area. Check width, depth, feet positions, and ventilation requirements. Never allow part of the appliance to extend beyond its proper support.
