Top loading washing machines have specific clearance needs that a front-loader-focused stand can’t always accommodate properly. The best dryer stand for a top loader needs to leave room for the lid to open fully upward, rather than assuming a front-opening door. Britec Innovative Products offers two models built specifically with this in mind.
Unlike front loaders, top loaders open upward from the top of the machine, which changes the clearance requirements around and above the appliance. A stand designed purely for front loaders can sometimes interfere with this upward opening motion.
Britec’s Adjustable and Ultra models are both suited to top loaders specifically, alongside front loaders, giving genuine flexibility for either appliance type.
The shelf height must allow the lid to open fully without making contact. Measure the lid’s highest point through its complete movement and include the dryer’s required ventilation clearance above the finished setup.
Top loaders can vary in width and control placement. Measure the entire cabinet, hoses, taps, and surrounding room, while keeping the detergent area and controls easy to reach after the stand is assembled.
Britec offers different freestanding configurations because a top loader, a standard front loader and a confined laundry do not require the same solution.
Top & front loaders
An adjustable option for households that need clearance above a top loader or flexibility around a front loader.
Two-dryer solution
A vertical two-tier configuration created for households that need to organise more than one dryer above a front loader.
Front loaders
A front-loader solution designed to move into position more easily in laundries where access around the washing machine is limited.
Both models share a similar foundation, but differ in a couple of specific ways worth understanding before choosing.
This model adjusts in both width and height, rated to hold up to 80 kilograms. It suits most standard top loading washing machines without needing any special modification.
Adjustable feet help level the frame across minor floor variations, although the floor must still be firm and suitable. Check the appliance width and full lid movement before finalising the stand’s width and height settings.
The Ultra offers the same 80 kilogram rating and width and height adjustment, but adds an extra low height option along with two shelf height choices. This suits laundries with tighter vertical clearance above the top loader.
The extra-low option should not compromise dryer ventilation. Compare the complete stacked height with cupboards and ceiling fittings, then choose the shelf position that preserves both washing machine access and safe clearance around the dryer.
A few specific questions help decide which of the two genuinely suits your laundry better.
Worth checking first:
If vertical space isn’t a major constraint, the standard Adjustable model covers most top loader setups perfectly well. If height is tight, the Ultra’s additional options tend to make the difference.
Check the dryer’s weight through its manual or official product specifications rather than estimating it from appearance. Measure its width, depth, foot positions, and ventilation requirements at the same time.
Also consider future appliance replacement. Adjustment may support another compatible setup within the model’s limits, but every measurement and weight check should be repeated whenever either appliance changes.
Regardless of which one suits your laundry, both use the same high quality steel frame and anti-slip rubber shelf found across the wider range. Adjustable feet are included on both, correcting for uneven laundry floors without needing any wall fixings.
The anti-slip shelf helps reduce gradual dryer movement, but it does not increase the published 80 kilogram rating. Correct assembly, stable floor contact, and suitable clearance remain essential throughout the life of the setup.
Britec has both models SGS tested on the relevant units, and each comes with a five-year warranty covering defects in material and workmanship. The business has operated in Australia since 2009, and its range is stocked by major retailers, including Harvey Norman, Bunnings, and Amazon.
Customer reviews currently sit at an Excellent rating across 104 reviews, which is worth checking when comparing these two specifically.
The warranty excludes normal wear, accidents, negligence, modifications, and unintended use. Damage caused by natural disasters also remains outside coverage, so keep your proof of purchase and assembly information after installation.
Will either model work with a larger, family-sized top loader? Both are rated to 80 kilograms, so it’s worth checking your specific machine’s weight and dryer combination first. Do I need any tools for assembly? Tools are supplied with every stand, and assembly is generally straightforward.
Can the stand move to another room later? Its freestanding design allows repositioning, but the floor, clearances, appliance weight, and every adjustment should be checked again before the stand is used in a new location.
Afterpay and Zip Money are both available at checkout, letting you spread the cost with no interest added. Shipping covers most of Australia through Australia Post or a selected courier, though deliveries can’t be sent to PO boxes.
If you’d rather compare the two in person, showroom pickup is available in Pemulwuy, New South Wales, and Ripley, Queensland, subject to stock. Installation is also offered in Sydney and Brisbane, generally costing between $120 and $200 depending on location.
Landing on the best dryer stand for your top loader usually comes down to how much vertical clearance your laundry actually has above the washing machine. Both offer genuine flexibility and the same reliable build quality found across Britec’s range. Reach us today to confirm which one suits your top loader best.
The value of a dryer stand is not simply that it holds an appliance. The design needs to work with the room, the washing machine and the way the household uses the laundry.
Freestanding
No wall brackets or drilling are required for the stand itself.
Adjustable setup
Selected models provide width, height or levelling adjustment.
Anti-slip shelf
Rubber shelf material is designed to reduce dryer movement and vibration.
Portable solution
A practical choice for renters and households planning future moves.
A simple process helps avoid fit issues and makes product selection much easier.
Record the available width, depth and height, including cabinets, doors and services.
Check machine dimensions, dryer weight and top-loader lid clearance where relevant.
Compare your measurements with Britec sizing guides and certified capacity.
Follow the model instructions or arrange professional installation in an available area.
Tony Kahale created the Dryer Stand after identifying a need for a more practical space-saving laundry solution.
The response to the original design led to Britec Innovative Products and an expanding range of home solutions. The company continues to develop products around common household problems, with customer conversations helping shape future designs.
Britec remains Australian owned and operated, with an in-house focus on product quality and personalised customer service.
Tony Kahale Founder & Product Design Developer
